Hewurpr

Advertisements

A second chapter

I have recently just completed a writing bureau for my  daughter.I found the desk on Trade Me, a regular selling site I use, I met the seller a lovely lady who was selling it on behalf of her father who was moving out of his earthquake damaged home that was to be repaired and into a rest home, I told her I was intending to restore it and give to my daughter ( I didn’t have the heart to mention the word paint), she was happy that it would go to someone who would appreciate it. I hope she would have liked what I have done.

I have been longing to transfer french script onto furniture, and when I came home and studied the writing  bureau and saw the beautiful wooden inlay on the front I became excited, it was the perfect place for french script, after opening up the desk and seeing the green felt I knew I was in for a challenge as that couldn’t stay there. I had recently seen samples of oilcloth in my local paint store Femme de Brocante and knew that would be perfect and then I could find a chair and upholstery it in the same cloth.

The first task was to remove the felt, so I took a craft knife, a scraper and a spray bottle of water and set to spraying sections of the felt, waiting 10 minutes or so for it to soak in and set to scraping the felt off, this was no easy task and bits of fluffy green felt was soon everywhere.

After I successfully removed the felt, I removed the hardware and the tiny nails in the board and the whole section of wood came out. I painted the bureau in Annie Sloan Pure White. My next task was to get my french script (print your reverse image on a laser printer) that can be found on the handy Graphics Fairy Website the link is here http://thegraphicsfairy.com/ and transfer it onto the front of the wooden inlay I had removed and since painted in Pure White. My first transfer method was to use just Annie Sloan paint as I have had great success in the past with this method and here is a link on how this can be accomplished by Janet Metzger at the Empty Nest – https://www.youtube.com/watch?v=9W1uBtzXI2I

Unfortunately this did not work as the script was far too fine and too much off it came off after I rubbed off the paper backing with water,  Not to worry I had some Annie Sloan Decoupage glue and varnish which also acts as another great transfer medium, I had heard Artisan Enhancement transfer gel is one of the best but unfortunately here in little old New Zealand is hard to get hold off and is expensive.

I have to be honest it did take me a few goes (four to be exact) before I got it  how I wanted it, there was a lot of sanding and repainting going on, the beauty of Annie Sloan’s paint is that you can make mistake without it costing you too much, the key is to go slow and be patient, as patience is a foreign concept to me I really struggled with this part.

Now the front part of my board was complete, it was time to find  material to use for the inner part, I selected a cute blue oil cloth with red cherries on it and made sure I bought enough to cover a seat cover. I purchased Annie Sloan’s Emperors silk for the wee cubby holes in the desk, thinking it would give a real pop of colour and tie in with the red cherries. After cutting the oilcloth to size, the hard part was to think about how I would adhere it. I tried a spray contact adhesive but unfortunately it didn’t try clear and I was left was patches showing through, I tied wallpaper paste and got the same results, next I tried to staple gun the edge of the cloth to the edge of the board but that didn’t work either as it started to split some of the board so frustrated and tired, my partner stepped in with Selleys exterior Aquadhere PVA glue that he uses on the building site, it dried pretty much clear although the fabric was a little duller it was at least even not very noticeable. Once the fabric was dry my helpful partner used gap filler and nailed the board back into plave.

I  found a cute little piano stall that someone had lovingly hand embroidered with 1950 on the top left corner, I painted it pure white also and as the top was completely removable  I tried my  hand at upholstering for the first time, I just covered some polyester straight over the embroidery as I didn’t have the heart to remove it and thought it would be nice to keep a little of history in it, I then took my left over oilcloth and my newly purchased staple gun and set to work.  I was surprised at how easy it was, it’s by no means a professional job and I still need to find some black backing fabric but I’m happy with the end result.

 

Finally with after putting on all the finishing touches, it was time for my favourite part, distressing and waxing. Here is the end result, this was not an easy project but well worth it as I have earned a lot from it.

 

As everyone loves a good before and after here it is…..

Ava’s Dresser

Recently a good  friend honoured me with the request to paint a dresser for her daughter Ava’s 8th birthday. Of course I said yes and was excited with my first custom paint job. I was given free creativity with the exception of pink, as Ava does not like pink. The colour duck egg blue by Annie Sloan came to mind and upon inspecting her room and curtains that were going to be put in there, it was a perfect match.

My next job was to hit my painting forum and Pinterest for inspiration, after going back and forth to the dresser for a couple of days I had an idea of what I was going to do.

IMG_3858The dresser had beautiful hardware that could be accentuated by painting it in old white, I also wanted to give a contrast to the drawers from the rest of the piece so decided to paint the drawers in pure duck egg blue and the rest 50:50 duck egg blue and old white. there was also a dead space up the top with a wooden plank that at first I thought I may remove but then decided could be a feature with a beautiful stencil.

After removing the hardware and giving the dresser a could clean, I set to painting the base, after the first coat I noticed patches of the paint flaking off.

IMG_4008

I have had this happen before and heard it can be due to an oily surface or a common culprit pledge that has been used to polish the piece, a quick fix is to paint some shellac over and repaint, this has worked for me before but unfortunately after a second coat, more patches appeared, I started to get frustrated and didn’t want to waste anymore paint so with my partner’s words ringing in my ears…’if you want to do a job properly you need to prep’ I set to sanding the entire side of it and then applied an undercoat just to be safe. It is said that you don’t need to prep or sand with Annie Sloan chalk paint and this was a big drawer card for me in choosing the paint to begin with, and yes it is true that while the paint can adhere to most surfaces there can be troubleshooting areas with bleed through and peeling, especially with older pieces of furniture so I have now decided on all custom pieces in the future I will heed my beloved partners words and prevent these time wasting problems by giving the piece a good sanding.

After my paint job was finished I looked for a suitable stencil and found a gorgeous one at http://printthistoday.com. I printed the stencil and by trial and error painstakingly adjusted the font to each drawer side and reprinted and then when happy I cut the stencil using out using a thick paper backing with my handy Fiskars 360 deg swivel craft knife.

Stencil

After finding a short stubby paintbrush I began to stencil onto the drawers and backboard and was pretty pleased with the results, after waxing the piece and attaching the hardware I had painted in old white my vision was complete, I was anxious that Ava liked it and am pleased to report she loves it!

 

 

IMG_4020

 

 

 

 

 

 

 

 

Coastal vintage

IMG_3813

When I bought this set of drawers (original picture of them below), I had a very set image in mind of how I was going to paint them; Annie Sloan Paris Grey and White trim, however after acquiring them and looking at them in my garage that image wasn’t fitting so I  stripped all the old varnish off to see what was underneath as they are apparently Rimu, one of New Zealand’s native timbers that will only become more scarce with time.

IMG_3385

I don’t like painting all wood and feel it would have been nice to keep it natural but the timber underneath looked rough and after staining a drawer to see if it made any difference I decided it needed to be painted. I thought about Annie Sloan Graphite, but after painting some on the top I decided it was too dark and felt like the piece was telling me it wanted to be lighter, I kept getting images of the beach in my mind so toyed with the idea of white washing it. I began to paint the white on and then after a while begin to wipe it off and could see this was what I wanted to do. After white washing with pure white I added a wash of Paris Grey and liked the colour effect. I then dry brushed some Graphite onto the areas where I felt like it needed it to give a more natural look too.

I love the different colours washed into this piece as well as the natural timber peeping through. After I was happy with the look of the entire piece I clear waxed it. It wasn’t until going to paint the hardware that I noticed one wasn’t quite the same as the others (bottom left) this was going to bug me, so I tried to find one that matched the rest that turned out to be  near on impossible so I decided to order two new bale handles  for the 2 smaller drawers above and am very happy with how they compliment the other original ones.